How To Repair A Broken Tile In Shower

Download Article

Download Commodity

Ceramic shower tiles may be damaged or cleaved over a period of years. This may include harm to the grout joints, or even individual tiles may crevice, causing water to leak into the walls or floor infinite, where information technology can damage subfloors or lower level spaces.^[1] This guide will help you to repair these problems.

Steps Download Article

1. 1

   Remove damaged tiles together with tile agglutinative (cement nether tiles). ^[two] You may have to suspension the tile into small-scale pieces and remove information technology.^[three] The biggest problem with this is that yous can easily break some of the adjoining tiles.

   • Using a grout saw or other tool, remove the grout from the tile joints surrounding the damaged tile(south). Be careful non to cutting through whatever membrane waterproofing underneath or behind the tiles.
   • Using a masonry bit, drill a hole through the middle of the tiles you lot need to remove. For large tiles you may demand to drill several holes and then the tile can exist cleaved upwardly to remove information technology.^[4] Again, be conscientious not to drill besides deep, or the substrate and/or whatever waterproofing membrane may be damaged.
   • Use a chisel to break out the tile(s) in minor pieces.
   • Remove the thinset mortar or tile adhesive behind the tile you have removed. Yous volition need a smooth, clean surface to install the replacement tile(southward) on.

2. ii

   Make sure whatsoever waterproof membrane is undamaged earlier proceeding. You may have to repair condom or vinyl membranes to clinch in that location isn't a leak underneath the tiles you are replacing, and the methods for doing so vary depending on the membrane used.

   Advertising

3. three

   Get some ceramic tile adhesive, or thinset tile cement and apply information technology to the substrate with a notched trowel. ^[v] For small-scale repairs, you may have to utilise a putty pocketknife to apply this material.

4. 4

   Supplant the tile by pushing it into the adhesive or thinset firmly so it is bedded in the fabric. Make sure the joints around the tile are compatible, and the surface of the newly installed tile(due south) are flush with the surrounding tiles.

5. 5

   Look for the tile adhesive to dry and so grout the joints surrounding whatever new tiles you have installed. ^[6] Use a sponge and plenty of water to clean excess grout off the tile's surface.^[seven] One time this material has dried and cured, it is difficult to remove.

6. vi

   Use a expert, waterproof bathroom sealant or caulk to repair any joints that do not lend themselves to grouting, such as metal trim or fixture penetrations. ^[8]

   Ad

Add New Question

• Question

  What is the best adhesive for shower tiles?

  

  Art Fricke
  Home Renovation & Repair Specialist

  Fine art Fricke is a home renovation and repair specialist and the owner of Art Tile & Renovation based in Austin, Texas. With over x years of experience, he specializes in bathroom and kitchen renovations. Art focuses on a unmarried contractor approach to customized renovation work, and performs projects such as installing custom tile showers, fixing tiled shower leaks, replacing cracked tiles, and installing flooring and wall tile.

  

  Home Renovation & Repair Specialist

  Adept Answer

Inquire a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Ad

Video

• Avert damaging next tiles by breaking the tiles you intend to supercede into small pieces with a hammer and chisel or a steel dial.

• Read and follow manufacturer's directions on the materials yous purchase to practice these repairs.

• Find extra replacement tiles before get-go this project. Matching colors and sizes of tiles may be difficult.^[nine]

Advertisement

• If there is not whatsoever membrane under old tiles, information technology is a good idea is to paint surface with some fluid applied membrane.

• When you intermission a broken tile you lot can damage tiles around. Have special care to protect other tiles in shower and take treat your tools. Heavy hammer in the shower can easy interruption some more tile. Even very experienced workers tin can easy damage some of the neighboring tiles, take information technology slowly when you remove broken tiles.

• Article of clothing safety glasses when breaking out damaged ceramic tiles.

• If in that location is membrane under old tiles exercise non break it( do non make whatever holes in information technology)

• Wear leather work gloves when treatment broken ceramic tiles.

Advertisement

Things You'll Need

• Replacement tiles
• Grout
• Tile agglutinative
• Hand tools

Near This Article

Thanks to all authors for creating a folio that has been read 315,407 times.

Did this article aid you?

Source: https://www.wikihow.com/Quickly-Repair-Bathroom-Shower-Tiles

Posted by: blakeondowde.blogspot.com

Share this post