How Do You Repair An Extension Cord

Has anyone other than me been out in the chiliad trimming bushes when all of a sudden your hedge trimmer stops working and you idea you broke something? Later on doing some investigating I realized I had cut articulate through my extension string. Bummer.

Instead of dumping information technology in the trash, I'g going to show you how to get your cord stock-still back up and prepare to go dorsum to powering all these tools that we have no room for.

Extension cords tin be expensive, peculiarly long ones or ones for outdoors, so if I can salvage it and save a few dollars I'm going to practise my best to exercise that. I had quite a few jobs when I was growing up so I've picked things upwards here and there, and I call up that when a wire or cables get cut you can splice them and put them back together.

Yet, you always want to join the same colored wires back together or you'll blow the breaker over again or something worse, like create sparks that can ultimately create a burn.

Oh, and I almost forgot, yous'll want to bank check your fuse box and flip the breaker that tripped to off back to on.

So let'southward move onto the actual task of putting information technology back together and operational. You lot'll only need a couple of supplies that you probably already have on manus.

Supplies needed

• electrical record
• wire cutters

You tin can find electrical record in diverse colors, and I'd become with the one closest to the color of the extension string you're working on.

Before yous start: unplug the extension cord! I know, this seems obvious, but double check before you brainstorm.

Step 1: Cut each of the cord ends to get a make clean edge.

Step 2: Next, cut back each of the cord ends about 1.5 inches so that all iii wires are exposed.

Step 3: From in that location, cutting off about 1 inch of each colored cable to expose the copper wire. After you have all iii copper wires exposed then twist each private wire to tighten the strand.

Pace 4: When yous accept each of the three wires on both cable ends stripped then ally each wire to the aforementioned color on the other string and twist them together tightly.

Stride 5: Subsequently twisting the wires together, grab your electric tape. Wrap the tape around each wire segment until they are completely covered.

Not doing this could result in the wires touching each other and creating a spark and throwing your breaker or even possibly starting a burn down.

Step 6: Now that you have all the wires together and completely taped individually, you can now lay the wires confronting the body of the cord and tape those against it as tightly as possible then it looks squeamish and every bit make clean equally possible.

21

Reader Interactions

Source: https://hellonest.co/how-to-fix-a-cut-extension-cord/

Posted by: blakeondowde.blogspot.com

Share this post