How To Repair Vanity Top

Pitting On New Polished Marble Vanity

QUESTION:

I recently installed a new polished carrara marble vanity top while remodeling my chief bathroom.

Now, a couple of weeks later on, information technology has "pitting" on one side, similar several fiddling nicks or fries in the marble.

I thought it was harm from work tools beingness laid on the vanity top past workmen while the remodel task is being finished, just the supervisor said it was "pitting".

What is pitting? What causes information technology? How can it be repaired?

ANSWER:

Pits and chips in marble are not common. Repair is piece of cake enough in most cases. I'll discuss the whole deal and all options below, just "spoiler warning"... here's the bottom line...

The easiest chip repair method is to fill the pits with a articulate acrylic like this Marble & Granite Repair Kit for Chips and Pits.

Yous can fix one pit in nigh 15 minutes with this product. One time y'all learn the simple steps, yous'll be able to fill 6 or 7 in 30-40 minutes (if yous have that many). Very easy, effective, permanent, and the most invisible. A big advance over previous techniques and products.

Let's review the whole story and all solutions....

Granite can sometimes develop pitting since it is composed of a multifariousness of different coarse-grained minerals of various sizes that tin come loose (normally with repeated practical forcefulness like around the sink where you constantly ready pots, pans and dishes) and pop out.

Marble is equanimous of highly compressed crystals and very rarely would "pitting" occur. Larn more about common issues and marble repair solutions (click here).

I'm 99.ix% certain information technology is not natural pitting in this example since these nicks occurred suddenly in the last two weeks, are all basically the same shape and size and in the aforementioned area.

Likely the pits would have been present on install if "natural".

Scratches and nicks can easily occur when using the vanity pinnacle as a workbench and setting tools or other heavy objects with sharp edges on the surface.

So, you have to ask yourself...

"Did these nicks be at the time of installation and you merely now noticed them?"

Or...

Are you certain the countertop was in perfect condition upon install, and the pits were revealed as the remodeling contractors finished.

Or...

They appeared after the contractors had long agone left the scene.

Could be whatever of these iii.... maybe you never noticed them (possible if the vanity top was not visible or cleaned up correct abroad), or the contractors caused them, or yous did somehow.

A telling sign that these resulted from trauma is that they are a much brighter white than the natural Carrara marble color.

This blazon of impairment (called a "stun mark") happens when something pointed forcefully crushes the crystals of the stone. The compressed crystals are nigh always lighter in color and often very white.

So, repeatedly setting a heavy tool downwardly could do information technology.

What yous take could be more like focused dents than pitting. Or possibly the pits were both stunned and chipped out.

Marble Repair Options for Chips & Pits

No matter how the pits were caused, or if they are dents, the possible solutions are the same.

Wax: Y'all can rub some wax into the nicks and buff information technology smooth using 0000 steel wool. Depending on the color this can brand for an adequate, but not necessarily permanent or invisible marble repair.

Colour-Match Epoxy Mix: Epoxy or resin granite & marble scrap repair kits are available, however.... they have some drawbacks....

• You lot accept to mix 2 or three ingredients, which is a pain
  
• Application and clean-up is messy
  
• The all-time you lot can practice is attempt to "friction match" the colour. Not like shooting fish in a barrel.
  
• Repair is usually totally visible....especially on stone without much design or colour-variation.

Articulate Acrylic Gel: This is the best and easiest selection. Fill the nicks with the Pit/Chip Repair Kit (see link at beginning of answer).

• No mixing, matching or mess with this product.
  
• The gel is pre-loaded into an applicator syringe to make filling pits effortless.
  
• Inject the acrylic into the pit and it cures quickly for a hard and permanent repair.
• The best part is that the clear gel allows the natural color and pattern to show through for the most invisible repair possible.
  

A note on stun marks... these are virtually impossible to repair without show. The clear acrylic is still the simplest and easiest method, but the brighter white colour will prove.

Y'all could opt to try and match the colour with an epoxy, just it'southward a gamble. Not likely to be successful. On a rather plain white surface even a slight divergence in color volition stand up out.

Of course, if you think the contractors did information technology yous can fight with them about it, simply the answer they gave obviously tells you they will dismiss information technology as non their fault.

Although, why would they install a marble vanity acme that already had pits in it?

Information technology's like shooting fish in a barrel enough and cheap enough to just ready it yourself, why stress yourself arguing with the contractors. They can't set information technology any better unless they replace the entire vanity meridian.

At that place is ane terminal choice, but information technology is expensive... that's to have a marble repair professional grind down and re-cease the surface. Really, this is only an choice if the pits are very shallow and non much grinding is required.

Deep Chips In Marble Table

past Lys
(Candler, NC, USA)

QUESTION:

The worst possible nightmare has occurred!

Slippery hands immune a heavy object to drop onto our marble table causing a deep dent.

While our table is very large and thick, the paring still also penetrated the surrounding surface to appear cracked, although non loose.

It measures 2cm in total circumference, simply only 1cm for the actual indent.

We are absolutely flabbergasted.

We read elsewhere to use silicone to fill in the gap after carefully washing with plain h2o and drying completely.

Since we are in absolute horror, nosotros need to check with you before farther damage is caused, because, we trust this site and the information provided.

What would be your evaluation? Give thanks y'all again for your assist, feel and patience.

Respond:

Hi Lys, cheers for your trust!

Using a colour matching caulk/silicone can work (it will fill up the dent and may be reasonably inconspicuous), although I don't call up it's the best solution.

You really can't create a clean, seamless transition from the caulk to the surface of the table. There will ever be a small lip or depression.

So, the edges will peel or go ragged and generally it volition be a noticeable patch.

I'd suggest using the Pit & Fleck Marble & Granite Repair kit designed for merely such an issue.

The above marble chip repair kit is most effective for smaller pits and chips, although it will likewise work on a dent and aid fill up in contiguous cracks radiating from the damaged spot.

This product is super-easy to apply compared to the old-school color-matching epoxies. It's a light-curing acrylic production that fills the pit or "paring", tin be sanded and buffed to exist even with the surrounding marble (no dips, lips or bumps), and cures to a difficult clear finish assuasive the natural color/pattern of the marble to prove through making an unnoticeable and permanent repair.

Besides consider calling a marble repair - restoration pro take a look. You may have damage that could need more elaborate treatment than just filling a pigsty, such as repairing the surface finish, etc.

Only if the dent/fleck is really a well-defined surface area and the borders are pretty sharp (the cracking of surrounding surface is the result hither), then the granite and marble repair kit volition do the job well and relieve you a bunch of money on a pro.

New Marble Countertop Has Shallow Pits

by Kathy
(Starkville, MS United states)

QUESTION:

Nosotros recently had new marble countertops installed in our kitchen.

We accept noticed many shallow pits in the surface.

Can you tell me what these are, and what should nosotros do about them?

Do our marble guys demand to have the counters back to their shop, or tin they be fixed on sight?

Answer:

Pits in marble countertops are unusual and are generally more like chips or slices. A simple repair tin can be done in place.

This type of blotch happens when surface crystals come loose and pop out, or bear on from a dropped object (plate, pan, appliance, tool) nicks the stone.

Set up chips, pits & nicks yourself using this marble chip repair gel / paste, which is waaaay easier to utilize than epoxies and resins, and the marble repair is about invisible.

Fries and pits will typically happen in areas of higher utilise and/or from repeated impact like around a kitchen sink.

The pits could take been in the slab prior to installation. Your countertop fabricator/installer is non probable to blame.

Anyway, we highly recommend the acrylic-gel Marble Scrap Repair Kit above. Information technology will exist the quickest and easiest way to permanently fill up these pits.

Source: https://www.countertopspecialty.com/marble-repair-solutions-for-chips-pits.html

Share this post